Common maintenance misunderstandings of jewelry | OEM jewelry factory

If the jewelry is not properly used and maintained, the jewelry will be damaged, lose its luster, and may even loosen, fall or lose the gem. Maybe you know how to use and maintain, but some misunderstandings are often overlooked in our daily lives. Today the author will talk about the misunderstandings in jewelry maintenance that we often overlooked in the past few years. 1. Don't often touch the jewelry while wearing it to protect it cleanly. It seems simple but not easy. Many people see the jewelry beautifully and charmingly, so they can't help but touch the surface of the gemstone with their hands. This method will actually affect the luster and brightness of the gemstone. The human body excretes sweat and oil on the surface of the skin from time to time. The hands are the easiest to touch the body parts. Therefore, the oil on the skin often contaminates the surface of the hands. When touching the gems with the hands, the oil on the hands will easily stay on the gems. Above, it affects the luster and brightness of the gem. In particular, diamonds are lipophilic gems, and the surface is easily contaminated with oil, which greatly affects the luster. 2. Using toothpaste to clean the jewelry is wrong! There is a saying in the jewelry circle: using a toothbrush dipped in toothpaste to brush the jewelry, the jewelry that can be used looks as beautiful as new. In this regard, Naklulu silver jewelry manufacturers must say that it is a big mistake. Cleaning jewelry should be possible, but toothpaste is not ideal, because toothpaste contains fine high-hardness abrasive particles, these particles are very small but the hardness is as high as six or seven degrees (almost the same as crystal), so use toothpaste to clean jewelry It will damage the surface of gems with lower hardness than crystals, especially pearls and gold-plated surfaces. For pearls, avoid cleaning with toothpaste. The most correct cleaning solution should be a diluted neutral surfactant (such as salad dressing, baby shampoo). 3. Tap water damages the luster of pearls. Some people want to clean and maintain pearl jewelry after wearing them several times. They don't know that short-term cleaning with tap water has little effect on the jewelry, but if it is used to soak pearls, it is absolutely necessary. Because the tap water has a fixed content of chlorine (C1), it will damage the luster of the pearl surface. In fact, mineral water should be the most ideal for washing pearls. In addition, after wearing a pearl, it must be washed and maintained before sending it to the safe deposit box of the bank, so as to avoid the accumulation of dirt for too long in the future to cause the pearl to change color. Besides, the safe deposit box of the bank for storing cash and documents has a relatively low relative humidity. The conditions are relatively unsuitable for gems with tidal properties such as pearls, such as pearls, proteins, etc., so they must be taken out at regular intervals, soaked in water for maintenance and added humidity. 4. Take it off at the right time. Wearing jewelry that is properly maintained should be replaced or taken off diligently according to the difference of people, events, time, place, and things, but for busy modern people, there may be no way. But at least it is best to remove it when washing your hands, because some soaps contain different levels of alkaline substances, and the accumulation of time may cause a kind of damage to the more fragile gems, and the soap in the soap is also easy to get stuck in the ring. In the small seams, it greatly affects the luster and brightness of the gemstone. In addition, bathing, doing housework, swimming, etc. can also easily cause jewelry collision and injury. For more jewelry maintenance information, please pay attention to the website, or online (telephone) consultation and discussion about the customized production of gold jewelry. Xiamen Co., Ltd. can provide ODM with similar samples/new styles/revisions. OEM customers can accept custom processing with patterns. Next: The Importance of Polishing Process to Silver Jewelry-Event Jewelry Custom Manufacturer Previous: Jewelry Wearing and Matching Gives You Extra Points|Commercial Gift Custom Manufacturer