Does the brass necklace fade, and how to deal with it-jewelry In recent years, the brass jewelry industry has developed rapidly, with its high-quality and inexpensive jewelry occupying most of the jewelry industry. Xiamen Jewelry is a factory with 13 years of experience in the jewelry industry. It has a 1,000-square-meter production workshop, advanced machinery and equipment, and tens of thousands of brass necklace samples for you to choose and order. Does the brass necklace fade and how to deal with it. Let the author share it with everyone below. How to deal with the fading of brass necklace jewelry 1. Cleaning the rusted brass necklace jewelry first use a special copper cleaning agent, which can gradually wash away the surface layer of the necklace that is damaged by rust, and make the intact part of it undamaged. The length of the soaking time depends on the surface condition. If the rust is severe, you can soak it in the solution for ten minutes, and if the rust is slight, you can clean the surface rust, grease, and perspiration by just a few minutes. 2. After cleaning, use a copper chemical polishing solution, which is mainly to selectively dissolve the uneven areas on the surface of the brass necklace product, eliminate wear marks, and erosively level it. It can also remove burrs, copper rust and other impurities. After polishing, the surface can achieve a mirror-bright effect, with uniform and long-lasting luster. 3. The polished brass necklace is quickly put into the copper passivation solution. The main purpose of passivation is to prevent rust and discoloration. After the passivation treatment, the copper workpiece can be kept bright as new for a long time without oxidation and discoloration and rust prevention. The triple function can also achieve higher resistance to salt spray test, without affecting electrical conductivity, rust and oxidation resistance. There are many ways to deal with the discoloration of brass necklace jewelry. The above are three very good ways to deal with it. I hope it will be helpful to you. If you have a better way, please contact us: Mr. Wang