How does the jewelry processing factory repair and handle jewelry of different materials?

Jewelry processing factories usually produce and process jewelry in large quantities. It is inevitable that a small part of the jewelry will be damaged. The way to deal with this problem is to carry out targeted secondary processing and repair, then the repair methods for different materials of jewelry What is the difference? The jewelry processing factory learned that for imitation gold jewelry, the main materials are copper, silver, etc., and they can be soldered with a soldering iron by themselves. It should be noted that the damaged part of the jewelry should be scraped off with a knife before welding. If the contact area of u200bu200bthe damaged part is relatively small, the contact surface can be filed with a file during the jewelry processing to increase the contact area. Then, drop pine perfume on the contact surface. In addition, for silver jewelry and aluminum jewelry, jewelry processing plants need to use special solder powder and solder. After the jewellery is welded, the welded part is ground and smoothed by hand with a small file. If the color fades, it will be stripped and electroplated again. However, if it is precious metal jewelry, such as gold, silver, jewelry, jade, etc., it requires certain skills to complete, and the process is more complicated. These are usually completed by the jewelry processing department. Next: How to avoid silver jewelry 'hit' styles? Jewelry Processing Factory Previous: What are the product advantages of silver jewelry? Tell you