How to measure the size of the ring and the precautions for measuring the finger

How to measure the ring size and the precautions for measuring the ring size-jewelry How to measure the ring size method Let the author introduce to you, I hope you can use this method, and find a decent ring for your beloved as soon as possible. 1. If you plan to order a ring at home, but you don’t know the size of your finger, you can use a simple method to measure it. First use a silk thread around your finger, then cut and straighten the silk thread, and measure the size of the silk thread with a ruler. Length, and then compare the table (for example, the length of the thread you measured around your finger is 53MM, then the size of your finger is 13). 2. If you already have a suitable ring to wear, but don’t know the specific number and size, directly take the appropriate ring to measure the inner diameter of the ring to determine the size (note that the inner diameter does not include the thickness of the ring) (for example: measured The inner diameter is 17MM, then your hand size is 13). Ring size comparison table Ring measurement method Ring size measurement Note 1. When measuring hand size, please make sure it can smoothly slide over the knuckles; if it feels too much after wearing the ring If it is loose, you can wind a few rounds of thin thread, red thread or silk thread on the inside of the ring. If it is too tight, you can apply moisturizer or soapy water on your fingers so that you can put it on or take off smoothly. 2. When buying a ring in winter, because the weather is colder, your fingers are one size to one half size thinner than in summer. If you want to get a more exact size, you can measure it at the end of the day, because the size of your finger is the largest at this time. 3. The size comparison table is for your reference only. If you cannot guarantee the accuracy of the measurement figures, it is recommended that you go to the jewelry store and measure your hand size to avoid buying inappropriate rings. Reminder: Remember not to measure directly along the finger, make a loop and adjust the size repeatedly to ensure that the finger can pass. Because the knuckles are generally slightly thicker than the heel, the amount of light along the heel will be smaller. Generally speaking, for sterling silver rings and silver rings inlaid with gemstones, if there is a size error of 1~2, it can be corrected by the store. But if you choose a suitable model accurately, won't you save a lot of trouble? The above is the ring measurement method and the processing method in the measurement process shared by the jewelry for everyone. I hope it will be helpful to you. If you have a better way, you are welcome to contact us: Mr. Wang