Talking about Jewelry Processing-Sandblasting Process

How does sandblasting affect jewelry processing? Nowadays, many jewelry is no longer shiny, many of which have rough surfaces with texture. This is the sandblasting process in jewelry processing. The sandblasting process is to partially blast the surface of the metal jewelry according to the design requirements to make the polished surface of the metal jewelry form a sharp contrast to enhance the aesthetics of the line art of the jewelry. There are two types of blasting processes: one is dry sand and the other is water sand. 1. The main tools needed for sandblasting: 1. Sandblasting machine; 2. Air compressor; 3. Emery (quartz sand); 4. Protective tape or protective wax 2. Operation steps: 1. Polished and cleaned The parts of the jewelry that do not require sandblasting are sealed with protective wax or protective tape for protection. When sticking protective tape or spotting protective wax, the lines should be smooth and neat. 2. Select the appropriate thickness of emery as required and place it in the sandblasting machine. Then adjust the required air pressure. 3. Hold the broken jewelry piece, put the part that needs to be sandblasted into the sandblasting machine, aim at the sandblasting machine outlet, open the air pressure valve, and spray emery on the metal jewelry piece by air pressure until it meets the requirements. The blasting position must be complete and uniform in order to achieve the effect. Sandblasting is only one of the many processes in jewelry processing. For more information on jewelry processing technology, please pay attention to the website or consult online (phone) to discuss gold jewelry processing matters. Next article: Stars teach you how to use jewelry to match the finishing touch. Last article: Necklace matching, how to distinguish the size of the necklace in one second?