The basic flow of jewelry inlay process

Many people are looking for how the diamonds in their hands are mounted, and they are also worried about what to do if the diamonds on their jewelry are dropped? The following is a brief analysis of the basic process of inlaying gemstones. I hope to help you in the maintenance of gemstone jewelry. Many people are looking for how diamonds are set in their hands, and they are also worried about the loss of diamonds on their jewelry. What to do? The following is a brief analysis of the basic process of inlaying gemstones, hoping to play a role in the maintenance of gemstone jewelry for everyone: the basic operation steps of inlaying process 1. Viewing the stone. 　　　　Observe the shape and size of the gemstone to see if the gemstone has cracks and whether it can withstand the pressure required for setting.　　　　2, pendulum stone. Place the gem on the ring setting to see if the gem fits the setting specifications and whether the claws are long enough to fix the gem.　　　　 3. Positioning. It is measured by the shape of the gemstone. The size of the metal jewelry piece's inlay is determined. The size of the location required for the inlay is determined. First, the inlay is ground into a concave groove with a dental needle until the gem can be fixed. Then use the umbrella needle to grind a notch on the claw position according to the height of the gemstone to facilitate the fixation of the gemstone. The position of each claw must be polished uniformly, without height, otherwise the gemstone will appear uneven after setting.　　　　 4. Enter the stone. Put the gem into the pre-adjusted setting, and then confirm whether the gem and setting are evenly placed, the surface is balanced, will not be loose, will not be offset, and they must be completely consistent.　　　　 5. Solid stone. Fix the gems placed in the setting. When fixing, you must use force according to the hardness of all kinds of gems. When using the clamp, the force must be even. If the force is too large, the gems will be damaged; if the force is not enough, the stone may not be firm and easy to loosen.　　　　 6. Repair. After the above steps, it is inevitable to leave pliers marks and file marks, which will damage the overall appearance of the jewelry. It must be repaired, especially the long claws should be cut short. When repairing the claws, you must pay attention to the safety of the face. It is best to use your fingers to protect Good gems, then use a file and sandpaper to round, smooth and repair the claws.　　　　 The above is the information about jewelry inlays summarized by the author for you. The information comes from the Internet. If there is something wrong, please understand. If you need to inlay, please pay attention to the official website of jewelry inlay. Jewelry inlay is waiting for your inquiry!