Three ways to make your hardware jewelry reappear shine-Xiamen Jewelry Factory

Xiamen Jewelry Factory’s main products: Necklaces, rings, earrings, jewelry and other high-quality hardware and silver jewelry manufacturers. Hardware jewelry will be worn for a long time, and the luster of the jewelry will be far less than before. Hardware jewelry stored in the jewelry box will not be worn. The luster of the jewelry will also decrease as it grows. The original beautiful color becomes gray, and there will be a gap in my heart. I don’t know if you feel this way. Is there any way to solve this problem? In major jewelry stores, jewelry that has been stored for a long time has always maintained a beautiful luster. Why is this? I don't know if you have noticed that the store staff will regularly clean and maintain all kinds of jewelry on the counter. Correct! Is cleaning and maintenance! People need to wash every day to keep them clean and beautiful. The same goes for hardware jewelry. 1. The removal of dust is to clean the dust and dirt of hardware jewelry and jewelry. The easiest way is to use a soft brush dipped in hot water to gently scrub, and use a cotton ball dipped in soapy water and absolute alcohol to scrub. Do not use abrasive particles (such as toothpaste, polishing paste, fine sandpaper or fine emery cloth, etc.) to clean it to avoid reducing the weight of gold and causing loss. 2. Washing When washing metal jewelry, first put the jewelry in a container, then add water to the container, then add a small amount of ammonia, then close the mouth tightly, shake it back and forth, and then take it out and wipe it dry. When wearing jewelry, you should also maintain the buckle switch, and regularly drop a little sewing machine oil on the switch to prevent the micro spring in the switch from rusting. 3. Removal of spots Because some commercial cosmetics contain trace amounts of mercury (mercury), such as phenyl hydroxymercury and mercury dichloride in freckle creams, white spots or whitening will appear after jewelry contact. At this time, do not use a knife to scrape or sand paper. As long as the jewelry with white spots or whitening is baked in a fire, and then wiped clean with a soft cloth, the hardware jewelry will restore its original luster. Prev How to restore the luster of gold-plated stainless steel jewelry? Fashion Jewelry Manufacturers