What is the method of gilding the jewelry processing explained by the jewelry manufacturer?

Jewelry manufacturers in the market, we can see all kinds of exquisite jewelry, then you know what process is used to make these jewelry, especially in terms of gold plating, then how to process gold-plated jewelry is what? Let the author of the jewelry factory tell us about it. 1. Jewelry must be electrolyzed before electroplating, 5% pickling after electrolysis, (usually 5% sulfuric acid), and then washed three times. 2. Preparations before electroplating: turn on the power, adjust the voltage to the voltage specified by the metal to be plated, connect the anode (positive) of the power supply to the titanium mesh placed in the electroplating tank, and connect the cathode (negative) of the power supply to the jewelry water line to be electroplated. 3. After that, the water line connected to the cathode power cord with jewelry items should be quickly put into the electroplating bath, and it should be noted that all the jewelry should be immersed in the electroplating solution, and the jewelry should be kept in the electroplating bath. Move back and forth. 4. After 10 seconds, quickly remove the water line and jewelry from the electroplating solution, and rinse with water for three to four times after taking it out. 5. Dry the cleaned jewelry in a special jewelry heating and drying oven, and the entire jewelry electroplating process has been successfully completed. What has been introduced above is how to gild jewelry. We pay more attention to quality and hope it can be helpful to you. If you want to know more about the jewelry factory, you can click on the jewelry factory's website page to browse! Prev What are the points that ring manufacturers should pay attention to when customizing diamond rings?